Search
Daily All In

Edition: English

Athletics & Cycling

Shimano's updated Dura-Ace C50 wheels add carbon spokes and cut weight

Cyclingnews puts the new R9300 Dura-Ace C50, the wheel Mathieu van der Poel rode to victory on the final stage of the Tour de France, through months of testing.

Shimano Dura-Ace R9300 C50 wheel fitted to a road bike during testing
AI-generated illustration

Shimano released its redesigned Dura-Ace R9300 wheel range in late July, a six-model line-up that arrives after months of speculation sparked by sightings of unmarked prototype rims and hubs on professional bikes during the spring.

Mathieu van der Poel had been racing on the unbranded prototypes since early in the season, and the finished wheels reached the market just three days after his win on the final stage of this year's Tour de France, according to Cyclingnews.

Within the range, the C50 has traditionally been Shimano's most widely raced model, valued as an all-rounder thanks to its 50mm rim depth, which the outlet notes makes it suited to the broadest range of terrain.

Cyclingnews reports that the previous-generation R9200 wheels struggled to win over amateur and professional riders alike, with Alpecin-Premier Tech the only men's WorldTour team using them regularly, and says the new version has been received more positively, helped by bolder graphics and visible carbon spokes.

The most significant change is the switch from steel to Vonoa carbon fibre bladed spokes, with the count reduced from 24 to 21 at both the front and rear wheel to save weight.

Cyclingnews measured the new C50 at 1318 grams with tubeless tape fitted, split 600 grams front and 718 grams rear, a notable drop from the roughly 1461 grams recorded for the outgoing wheelset.

The rim itself has grown, with internal width up to 23mm from 21mm, while external width is now specific to each wheel at 31mm at the front and 32mm at the rear, with the wheelset optimised for 28-30mm tyres.

Shimano has cited a 2.7-watt aerodynamic drag saving at 48km/h when fitted with 30mm tyres, though Cyclingnews has not yet run the new wheels through its own wind tunnel testing and notes the previous-generation C50 finished at the bottom of its table when last tested in 2024.

Shimano has retained its cup-and-cone bearing arrangement in the hubs rather than switching to sealed cartridge bearings throughout, a design shared with Campagnolo's Record hubs, though sealed cartridge bearings remain inside the freehub body.

A new feature allows the bearing cups to be replaced, meaning the whole hub assembly can now be serviced rather than discarded if the cups wear out, addressing an issue Cyclingnews says it has previously encountered on older Dura-Ace hubs.

The aluminium freehub body currently takes a standard Shimano 12-speed cassette, though Cyclingnews understands the next Dura-Ace groupset will move to 13 sprockets, suggesting the extra sprocket will fit within the existing freehub space.

Cyclingnews tested the wheels, priced at $2,970 / £2,298.99 / €2,699.98, over several months fitted to a Canyon Endurace CF SLX.